1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables." Top Answer. Ryan S. January 25, 2021. The 2017 Ford Escape You will have to follow these steps to find out how to properly jump-start the vehicle. The first thing You will need to do is get the proper equipment such as jumper cables, and proper safety equipment. Next, You will open the hood and find the battery on the driver's side of the vehicle. Battery terminal ford fusion cable fuse positive block mkz oem 2007. Battery fusion ford corrosion terminal 2010Oem new 2011-2020 ford edge fusion negative battery terminal cable Terminal ford battery fusion cable negative edge clamp oem2013-2016-ford-fusion-12v-automotive-battery-replacement-guide-011. Step 1 – Get ready for the jump start. Make sure your engine and exhaust systems are cool. This reduces the risk of gasoline vapors in the engine area. Make sure you turn off all the electronics before you try to jump your battery. Sound systems, interior lights, and headlights all drain electricity from the battery. On a 2016 vehicle the battery is intended to be charged while still connected to the vehicle. The battery charger positive lead should be connected directly to the battery terminal, and the negative lead from the charger should be connected directly to the main chassis earth point - DO NOT connect it to the battery negative terminal. In fact the only owner's manual statement is on page 1-20; “Access to the battery is not necessary for jump starting. There are remote positive (+) and negative (−) terminals under the hood for this purpose.” However the only discussion of how to jump start is on pages 10-65 to 10-68 with sketches. It's a safety issue to avoid shorting the battery terminals through the frame. I was trying to determine if the voltage regulator might get fried if you connect the positive last, but that doesn't make sense because when you crank the car, you're applying the positive last. The grounds always have connection to the negative terminal. – Connect the black cable to the negative terminal of donor battery. Finally connect the other end of the black cable to any bare unpainted metal part of the body or engine of your XF. Safety warning: Connecting black cable directly to the negative terminal of XF battery can ignite flammable gases from the battery due to sparks. Start your XF. .

jump start ford c max battery negative terminal